Stakes and Risers

Irrigation system stakes and irrigation system risers are used to support and lift sprinkler heads and small sprinklers above garden foliage. This added height and extension helps improve spray direction and coverage across garden beds.

This range includes five components:

• 200mm Rigid Riser with 4mm Adaptor
• 300mm Rigid Riser with 4mm Adaptor
• 450mm Rigid Riser with 4mm Adaptor
• 300mm Riser Stake Suits 4mm Tube
• Universal Hold Down Stake
  
  

Choose a riser length based on the height you need for your sprinklers and sprinkler heads:

• 200mm for low plants and smaller garden beds
• 300mm for general garden beds and shrubs
• 450mm when you need extra extension above denser foliage for better irrigation coverage

Pope rigid risers with a 4mm adaptor are designed to be screwed directly into polyethylene tubing. You can then screw jets, sprays and spinners into the rigid riser to elevate your sprinkler outlet above plants for more effective watering.

The 300mm riser stake is pushed into the soil to provide stable support for 4mm rigid risers. The riser snaps into place, helping keep sprinkler heads well positioned for consistent sprays and a neater end-to-end irrigation layout.

The Universal Hold Down Stake is used to secure 13mm or 19mm poly tube so it does not lift or move. It is especially helpful at bends and curves where tubing can shift over time, helping keep your irrigation system stable from end to end.

No. Stakes and risers are positioning components - they add stability and extension so sprinklers can sit at the right height, but they do not require complex pumps. They are simply installed into your irrigation system layout to support even watering.